I was able to have one successful boot, but after shutting it down via the command line to address a missing USB3 connected drive issue, the XU4 has not been willing to reboot. My rig consists of an Odroid-XU4 and the Odroid Cloudshell.
I was able to find the post about the USB3 connection problem and carefully cleaned the contacts as per the instructions. When I attempted to re-start the rig, it was non-responsive. I do get a red light indicating that the XU4 board is getting power, but nothing else happens. This led me to format and re-flash several images on three different SD cards multiple times to ensure that the problem is not with my activities. Here are the images I used:
- syncloud-odroid-xu3and4-17.01(First Boot Worked)
To create these SD cards I followed the advice in the wiki and forms and used FAKEFLASH to test the cards and SDFomater to format them before flashing. I also used the odroid version of Win32DiskImage.
All attemps keep resulting in the same problem. The XU4 will not boot.
Can any one advise....is this a defective board?